Index / devtools

Kiln

io-github-codeofaxel-kiln declares 851 capabilities across 851 tools, with 2 critical issues.

100/100 exposureHigh exposure

Manifest recorded 2026-10-21 from tools/list answered by the PyPI package kiln3d==1.5.0 (published to PyPI as kiln3d, listed in the official MCP registry as io.github.codeofaxel/kiln 1.5.0), run in an isolated container with no network access and placeholder credentials. The date changes only when the manifest does. Not verified by a maintainer.

Issues

These describe what this server's manifest declares. A product can provide controls that MCP has no way to express — token revocation, an admin console, audit logs — and this page cannot see them. The absence of a declaration is not evidence that a control is absent.

critical · no-revocation · All 851 tools

851 of 851 tools declare no way for the customer to switch them off once granted. This applies to every tool because MCP has no field in which to declare a revocation mechanism; the product may provide one outside MCP that a manifest cannot show.

critical · irreversible-uncapped · 46 of 851 tools

46 tools are classified as irreversible and declare no limit.

high · no-expiry · All 851 tools

851 of 851 tools declare no expiry. This applies to every tool because MCP has no field in which to declare an expiry; the product may provide one outside MCP that a manifest cannot show.

high · no-audit-trail · All 851 tools

851 of 851 tools declare no record of their actions that the customer can read. This applies to every tool because MCP has no field in which to declare an audit requirement; the product may provide one outside MCP that a manifest cannot show.

high · uncapped-write · 443 of 851 tools

443 tools can modify data and declare no limit.

low · uncapped-read · 362 of 851 tools

362 tools can read data and declare no limit.

Declared capabilities

How each tool was read. declared means the server's own annotation said so — self-reported and unverified. inferred is from the tool's name. assumed means nothing indicated either way.

Tool	Read as	Basis
`printer_status`	`read`	inferred
`monitor_print`	`read`	inferred
`printer_files`	`read`	inferred
`upload_file`	`write`	inferred
`upload_file_confirm`	`write`	inferred
`analyze_print_file`	`read`	inferred
`delete_file`	`delete`	inferred
`start_print`	`write`	inferred
`cancel_print`	`delete`	inferred
`calibrate_direct`	`send`	inferred
`emergency_stop`	`write`	assumed
`emergency_status`	`read`	inferred
`clear_printer_error`	`write`	assumed
`clear_emergency_stop`	`write`	assumed
`force_print_oversize`	`write`	assumed
`emergency_trip_input`	`write`	assumed
`pause_print`	`write`	assumed
`skip_print_objects`	`write`	assumed
`resume_print`	`write`	assumed
`set_temperature`	`write`	inferred
`ams_status`	`read`	inferred
`cfs_status`	`read`	inferred
`set_speed_profile`	`write`	inferred
`run_speed_schedule`	`write`	assumed
`get_speed_profile`	`read`	inferred
`set_printer_light`	`write`	inferred
`set_fan`	`write`	inferred
`wrap_gcode_as_3mf`	`write`	assumed
`get_bed_mesh`	`read`	inferred
`get_filament_status`	`read`	inferred
`get_tool_position`	`read`	inferred
`preflight_check`	`read`	inferred
`send_gcode`	`send`	inferred
`issue_preview_token`	`read`	inferred
`confirm_action`	`write`	inferred
`fleet_status`	`read`	inferred
`register_printer`	`write`	assumed
`set_printer_model`	`write`	inferred
`create_project`	`write`	inferred
`log_project_cost`	`write`	assumed
`project_cost_summary`	`read`	inferred
`client_cost_report`	`read`	inferred
`recent_events`	`read`	inferred
`license_status`	`read`	inferred
`activate_license`	`write`	assumed
`restart_server`	`write`	assumed
`get_autonomy_level`	`read`	inferred
`set_autonomy_level`	`write`	inferred
`check_autonomy`	`read`	inferred
`marketplace_info`	`read`	inferred
`download_and_upload`	`write`	inferred
`rotate_model`	`write`	assumed
`check_orientation`	`read`	inferred
`printer_snapshot`	`write`	assumed
`list_materials`	`read`	declared
`set_material`	`write`	inferred
`get_material`	`read`	declared
`check_material_match`	`read`	inferred
`list_spools`	`read`	inferred
`add_spool`	`write`	inferred
`remove_spool`	`delete`	inferred
`bed_level_status`	`read`	inferred
`trigger_bed_level`	`write`	assumed
`set_leveling_policy`	`write`	inferred
`webcam_stream`	`write`	assumed
`list_plugins`	`read`	inferred
`register_webhook`	`write`	assumed
`list_webhooks`	`read`	inferred
`delete_webhook`	`delete`	inferred
`await_print_completion`	`write`	assumed
`compare_print_options`	`read`	inferred
`analyze_print_failure`	`read`	inferred
`render_model_preview`	`read`	inferred
`visualize_model`	`write`	assumed
`compare_renders`	`read`	inferred
`get_feedback_loop_status`	`read`	inferred
`list_design_templates`	`read`	declared
`generate_from_template`	`write`	assumed
`list_plate_objects`	`read`	inferred
`extract_plate_object`	`write`	assumed
`print_plate_object`	`write`	assumed
`resolve_model_source`	`write`	assumed
`validate_openscad_code`	`read`	inferred
`predict_print_failure`	`read`	inferred
`search_design_templates`	`read`	inferred
`design_to_gcode_pipeline`	`write`	assumed
`merge_stl`	`write`	inferred
`compose_multicolor_3mf`	`write`	assumed
`update_firmware`	`write`	inferred
`rollback_firmware`	`write`	assumed
`print_history`	`read`	inferred
`printer_stats`	`read`	inferred
`annotate_print`	`write`	inferred
`export_safety_profile`	`write`	assumed
`get_material_recommendation`	`read`	declared
`troubleshoot_printer`	`read`	declared
`run_quick_print`	`write`	assumed
`run_reslice_and_print`	`write`	assumed
`multi_copy_print`	`write`	assumed
`run_calibrate`	`write`	assumed
`run_benchmark`	`write`	assumed
`find_material_substitute`	`read`	declared
`get_best_material_substitute`	`read`	inferred
`get_material_properties`	`read`	inferred
`check_printer_material_support`	`read`	inferred
`compare_material_properties`	`read`	inferred
`build_material_overrides`	`read`	inferred
`reprint_with_material`	`write`	assumed
`smart_reprint`	`write`	assumed
`multi_material_print`	`write`	assumed
`merge_multicolor_gcode`	`write`	inferred
`multi_color_copies`	`write`	assumed
`extract_file_metadata`	`write`	assumed
`save_print_checkpoint`	`write`	assumed
`plan_print_recovery`	`write`	assumed
`firmware_resume_print`	`write`	assumed
`check_printer_health`	`read`	inferred
`start_printer_health_monitoring`	`write`	assumed
`stop_printer_health_monitoring`	`write`	assumed
`analyze_print_snapshot`	`read`	inferred
`get_fulfillment_quote_cached`	`read`	inferred
`print_status_lite`	`write`	assumed
`list_snapshots`	`read`	inferred
`printer_trend_analysis`	`read`	inferred
`check_ambient_conditions`	`read`	inferred
`decorate_surface`	`write`	assumed
`analyze_model_geometry`	`read`	inferred
`get_material_slicing_profile`	`read`	inferred
`generate_adaptive_slicing_plan`	`write`	assumed
`export_adaptive_slicer_config`	`write`	assumed
`estimate_adaptive_time_savings`	`read`	inferred
`quick_adaptive_plan`	`write`	assumed
`list_supported_materials`	`read`	inferred
`get_adaptive_plan_summary`	`read`	inferred
`ams_filament_drying`	`write`	assumed
`create_assembly`	`write`	inferred
`add_assembly_part`	`write`	inferred
`add_assembly_interface`	`write`	inferred
`validate_assembly`	`read`	inferred
`check_assembly_clearances`	`read`	inferred
`compose_assembly_parts`	`write`	assumed
`get_joint_recommendation`	`read`	inferred
`kiln_signin`	`write`	assumed
`kiln_signin_poll`	`read`	inferred
`cache_model`	`write`	inferred
`search_cached_models`	`read`	inferred
`get_cached_model`	`read`	inferred
`list_cached_models`	`read`	inferred
`delete_cached_model`	`delete`	inferred
`cache_design`	`write`	assumed
`list_cached_designs`	`read`	inferred
`get_cached_design`	`read`	inferred
`cloud_sync_status`	`read`	inferred
`cloud_sync_now`	`write`	assumed
`cloud_sync_configure`	`write`	assumed
`auto_color_by_height`	`write`	assumed
`auto_color_by_region`	`write`	assumed
`paint_decoration_faces`	`write`	inferred
`tax_estimate`	`read`	inferred
`tax_jurisdictions`	`read`	inferred
`tax_jurisdiction_lookup`	`read`	inferred
`donate_info`	`read`	inferred
`consumer_onboarding`	`read`	inferred
`validate_shipping_address`	`read`	inferred
`suggest_material_for_order`	`write`	assumed
`estimate_price`	`read`	inferred
`estimate_timeline`	`read`	inferred
`supported_shipping_countries`	`read`	inferred
`store_credential`	`write`	assumed
`list_credentials`	`read`	inferred
`retrieve_credential`	`read`	inferred
`save_decoration`	`write`	assumed
`list_decorations`	`read`	inferred
`apply_decoration`	`write`	assumed
`decoration_info`	`read`	inferred
`decoration_quota_status`	`read`	inferred
`record_decoration_success`	`write`	assumed
`iterate_decoration`	`write`	inferred
`decoration_history`	`read`	inferred
`rollback_decoration`	`write`	assumed
`analyze_structural_risks`	`read`	inferred
`recommend_design_reinforcements`	`write`	assumed
`assess_load_bearing`	`read`	inferred
`design_improvement_plan`	`write`	assumed
`apply_design_reinforcements`	`read`	inferred
`infer_print_settings`	`write`	assumed
`design_advisor`	`write`	assumed
`arrange_parts_on_plate`	`write`	assumed
`auto_arrange_parts_on_plate`	`read`	inferred
`optimize_template_params`	`read`	inferred
`solve_template_constraints`	`read`	inferred
`iterate_design`	`write`	assumed
`optimize_print_orientation`	`write`	assumed
`check_print_readiness`	`read`	inferred
`estimate_support_material`	`read`	inferred
`rebuild_design`	`write`	assumed
`analyze_design_requirements`	`read`	inferred
`build_generation_prompt`	`write`	assumed
`audit_original_design`	`write`	assumed
`get_material_design_profile`	`read`	inferred
`list_design_materials`	`read`	inferred
`recommend_design_material`	`write`	assumed
`estimate_structural_load`	`read`	inferred
`check_material_environment`	`read`	inferred
`get_design_template_info`	`read`	declared
`list_design_templates_catalog`	`read`	inferred
`find_design_templates`	`read`	declared
`match_design_requirements`	`read`	inferred
`validate_design_for_requirements`	`read`	inferred
`troubleshoot_print_issue`	`write`	assumed
`check_printer_material_compatibility`	`read`	inferred
`get_post_processing_guide`	`read`	inferred
`check_multi_material_pairing`	`read`	inferred
`get_print_diagnostic`	`read`	inferred
`estimate_print_cost_from_mesh`	`read`	declared
`build_parametric_prompt`	`write`	assumed
`parse_scad_parameters`	`write`	assumed
`update_scad_parameter`	`write`	inferred
`validate_scad_parameters`	`read`	inferred
`list_design_components`	`read`	inferred
`match_design_components`	`read`	inferred
`compile_scad`	`write`	assumed
`tweak_and_compile_scad`	`write`	inferred
`analyze_scad_code`	`read`	inferred
`modify_scad_module`	`write`	inferred
`insert_into_scad`	`write`	inferred
`cache_design_with_source`	`write`	assumed
`get_design_source`	`read`	inferred
`analyze_warping_risk`	`read`	inferred
`resolve_filament_profile`	`write`	assumed
`export_audit_trail`	`write`	assumed
`lock_safety_profile`	`write`	inferred
`unlock_safety_profile`	`write`	assumed
`manage_team_member`	`write`	assumed
`printer_usage_summary`	`read`	inferred
`uptime_report`	`read`	inferred
`encryption_status`	`read`	inferred
`rotate_encryption_key`	`write`	assumed
`database_status`	`read`	inferred
`configure_sso`	`write`	assumed
`sso_login_url`	`read`	inferred
`sso_exchange_code`	`write`	assumed
`sso_status`	`read`	inferred
`slice_and_estimate`	`read`	inferred
`estimate_cost`	`read`	inferred
`estimate_print_time`	`read`	inferred
`estimate_material_cost`	`read`	inferred
`estimate_print_progress`	`read`	inferred
`estimate_before_design`	`read`	inferred
`list_multi_material_addons`	`read`	inferred
`load_filament`	`write`	assumed
`unload_filament`	`write`	assumed
`purge_filament`	`delete`	inferred
`wipe_nozzle`	`write`	assumed
`firmware_status`	`read`	inferred
`check_firmware_status`	`read`	inferred
`update_printer_firmware`	`write`	inferred
`rollback_printer_firmware`	`write`	assumed
`fleet_analytics`	`read`	inferred
`list_fleet_sites`	`read`	inferred
`fleet_status_by_site`	`read`	inferred
`update_printer_site`	`write`	inferred
`route_print_job`	`write`	assumed
`fleet_submit_job`	`write`	assumed
`fleet_job_status`	`read`	inferred
`fleet_utilization`	`read`	inferred
`fulfillment_materials`	`read`	inferred
`fulfillment_quote`	`read`	inferred
`save_shipping_profile`	`write`	assumed
`list_shipping_profiles`	`read`	inferred
`delete_shipping_profile`	`delete`	inferred
`issue_shipping_confirmation_token`	`write`	assumed
`fulfillment_order`	`write`	assumed
`fulfillment_order_status`	`read`	inferred
`fulfillment_cancel`	`delete`	inferred
`fulfillment_alerts`	`read`	inferred
`validate_gcode`	`read`	inferred
`validate_gcode_safe`	`read`	inferred
`validate_print_quality`	`read`	inferred
`list_generation_providers`	`read`	inferred
`generate_model`	`write`	assumed
`generate_model_from_image`	`write`	assumed
`generation_status`	`read`	inferred
`download_generated_model`	`write`	assumed
`await_generation`	`write`	assumed
`generate_and_print`	`write`	assumed
`smart_generate_from_template`	`write`	assumed
`generate_template_variations`	`write`	assumed
`generate_model_with_provider`	`write`	assumed
`preview_generated_model`	`read`	inferred
`validate_and_prepare_mesh`	`read`	inferred
`generate_texture`	`write`	assumed
`home_axes`	`write`	assumed
`park_head`	`write`	inferred
`plate_status`	`read`	inferred
`look_at_plate`	`read`	inferred
`fingerprint_model`	`write`	assumed
`record_print_dna`	`write`	assumed
`predict_print_settings`	`read`	inferred
`find_similar_prints`	`read`	inferred
`get_model_print_history`	`read`	inferred
`contribute_community_print`	`write`	assumed
`get_community_insight`	`read`	inferred
`community_stats`	`read`	inferred
`recommend_material`	`read`	declared
`list_available_materials`	`read`	inferred
`start_gcode_interception`	`write`	assumed
`stop_gcode_interception`	`write`	assumed
`add_interception_rule`	`write`	inferred
`remove_interception_rule`	`delete`	inferred
`intercept_gcode_command`	`send`	inferred
`update_interception_telemetry`	`write`	inferred
`get_interception_status`	`read`	inferred
`list_interception_sessions`	`read`	inferred
`load_safety_interception_rules`	`write`	assumed
`get_interception_history`	`read`	inferred
`record_print_outcome`	`write`	assumed
`recommend_settings`	`write`	assumed
`save_agent_note`	`write`	assumed
`get_agent_context`	`read`	inferred
`clean_agent_memory`	`delete`	inferred
`get_printer_insights`	`read`	inferred
`suggest_printer_for_job`	`write`	assumed
`delete_agent_note`	`delete`	inferred
`search_all_models`	`read`	declared
`search_models`	`read`	declared
`model_details`	`read`	declared
`model_files`	`read`	inferred
`download_model`	`write`	assumed
`browse_models`	`read`	declared
`list_model_categories`	`read`	declared
`marketplace_status`	`read`	inferred
`marketplace_diagnostics`	`write`	assumed
`get_fleet_material_summary`	`read`	inferred
`get_material_consumption_history`	`read`	inferred
`forecast_material_consumption`	`write`	assumed
`check_material_sufficiency`	`read`	inferred
`get_restock_suggestions`	`read`	inferred
`find_printers_with_material`	`read`	inferred
`optimize_fleet_assignment`	`write`	inferred
`suggest_spool_swaps`	`write`	assumed
`get_active_material`	`read`	inferred
`check_print_health`	`read`	inferred
`diagnose_mesh`	`write`	assumed
`validate_generated_mesh`	`read`	inferred
`rescale_model`	`write`	assumed
`analyze_mesh_geometry`	`read`	declared
`detect_mesh_pockets`	`read`	inferred
`analyze_non_manifold_edges`	`read`	inferred
`cross_section_view`	`read`	inferred
`mesh_quality_scorecard`	`write`	assumed
`compare_mesh_versions`	`read`	inferred
`repair_mesh`	`write`	assumed
`repair_mesh_advanced`	`delete`	inferred
`splice_mesh_at_z`	`write`	assumed
`mirror_mesh_model`	`write`	assumed
`hollow_mesh_model`	`write`	inferred
`thicken_mesh_walls`	`write`	assumed
`add_mesh_fillet`	`write`	inferred
`add_mesh_chamfer`	`write`	inferred
`scale_mesh_to_fit`	`write`	assumed
`center_model_on_bed`	`write`	assumed
`compose_models`	`write`	inferred
`merge_mesh_files`	`write`	inferred
`boolean_mesh_op`	`write`	assumed
`compose_part_from_primitives`	`write`	assumed
`split_mesh_by_component`	`write`	assumed
`remove_mesh_floating_regions`	`delete`	inferred
`simplify_mesh_model`	`read`	inferred
`export_model_3mf`	`write`	assumed
`extract_model_from_3mf`	`write`	assumed
`show_on_stage`	`read`	declared
`estimate_mesh_weight`	`read`	declared
`estimate_mesh_print_time`	`read`	declared
`publish_print_twin`	`send`	inferred
`monitor_print_vision`	`read`	inferred
`watch_print`	`write`	assumed
`watch_print_status`	`read`	inferred
`stop_watch_print`	`write`	assumed
`start_monitored_print`	`write`	assumed
`first_layer_status`	`read`	inferred
`list_print_pipelines`	`read`	inferred
`pipeline_status`	`read`	inferred
`pipeline_pause`	`write`	assumed
`pipeline_resume`	`write`	assumed
`pipeline_abort`	`write`	assumed
`pipeline_retry_step`	`write`	assumed
`analyze_printability`	`read`	declared
`auto_orient_model`	`read`	inferred
`estimate_supports`	`read`	inferred
`recommend_adhesion_settings`	`write`	assumed
`diagnose_print_failure_live`	`write`	assumed
`printer_bench`	`read`	inferred
`discover_printers`	`write`	assumed
`list_trusted_printers`	`read`	inferred
`trust_printer`	`write`	inferred
`untrust_printer`	`delete`	inferred
`acquire_printer_lock`	`write`	assumed
`hand_back_printer`	`write`	assumed
`release_printer_lock`	`write`	assumed
`submit_job`	`write`	assumed
`job_status`	`read`	inferred
`queue_summary`	`read`	inferred
`cancel_queued_job`	`delete`	inferred
`cancel_queued_jobs`	`delete`	inferred
`job_history`	`read`	inferred
`analyze_print_failure_smart`	`read`	inferred
`get_recovery_plan`	`read`	inferred
`failure_history`	`read`	inferred
`plan_multi_copy_split`	`write`	assumed
`plan_assembly_split`	`write`	assumed
`split_plan_status`	`read`	inferred
`cancel_split_plan`	`delete`	inferred
`analyze_generation_feedback`	`read`	inferred
`improve_generation_prompt`	`write`	assumed
`generation_feedback_loop_status`	`read`	inferred
`detect_print_failure`	`read`	inferred
`plan_failure_recovery`	`write`	assumed
`start_print_recovery`	`write`	assumed
`confirm_print_recovery`	`write`	assumed
`cancel_print_recovery`	`delete`	inferred
`get_recovery_session_status`	`read`	inferred
`get_recovery_gcode_steps`	`read`	inferred
`record_recovery_check`	`send`	inferred
`complete_print_recovery`	`write`	assumed
`get_recovery_statistics`	`read`	inferred
`repair_guide`	`read`	declared
`safety_audit`	`read`	inferred
`safety_status`	`read`	inferred
`safety_settings`	`read`	inferred
`list_safety_profiles`	`read`	inferred
`get_safety_profile`	`read`	inferred
`add_safety_profile`	`write`	inferred
`list_printer_variants`	`read`	inferred
`select_printer_variant`	`write`	assumed
`give_print_code`	`read`	inferred
`consent_window_status`	`read`	inferred
`revoke_consent_window`	`delete`	inferred
`publish_model`	`send`	inferred
`generate_print_certificate`	`write`	assumed
`list_published_models`	`read`	inferred
`record_revenue`	`write`	assumed
`revenue_dashboard`	`read`	inferred
`model_revenue`	`read`	inferred
`create_print_service_order`	`write`	inferred
`print_service_quote`	`write`	assumed
`print_service_status`	`read`	inferred
`cancel_print_service_order`	`delete`	inferred
`slice_model`	`write`	assumed
`reslice_with_overrides`	`write`	assumed
`find_slicer`	`read`	inferred
`slice_and_print`	`write`	inferred
`list_slicer_profiles`	`read`	inferred
`get_slicer_profile`	`read`	inferred
`retry_print_with_fix`	`write`	assumed
`kiln_spend_caps_show`	`read`	inferred
`kiln_spend_caps_request_change`	`write`	inferred
`kiln_spend_caps_confirm_change`	`write`	assumed
`kiln_spend_caps_request_order_approval`	`write`	inferred
`kiln_spend_caps_confirm_order_approval`	`write`	assumed
`import_step_file`	`write`	assumed
`check_step_support`	`read`	inferred
`step_file_info`	`read`	inferred
`check_my_tier`	`read`	inferred
`get_session_log`	`read`	inferred
`upgrade_kiln`	`write`	inferred
`trim_serve_processes`	`delete`	inferred
`health_check`	`read`	inferred
`kiln_health`	`read`	inferred
`get_started`	`read`	inferred
`get_skill_manifest`	`read`	inferred
`verify_audit_integrity`	`read`	inferred
`backup_database`	`write`	assumed
`plugin_info`	`read`	inferred
`validate_and_prepare`	`read`	inferred
`prepare_ai_model_for_print`	`write`	assumed
`save_design_version`	`write`	assumed
`list_design_versions`	`read`	inferred
`diff_design_versions`	`write`	assumed
`rollback_design_version`	`write`	assumed
`get_design_version`	`read`	inferred
`search_design_versions`	`read`	inferred
`lock_design`	`write`	assumed
`auto_generate_manual_for_print`	`write`	assumed
`derive_assembly_plan`	`write`	assumed
`diff_assembly_manuals`	`write`	assumed
`embed_manual_in_3mf`	`write`	assumed
`find_manual_siblings`	`read`	inferred
`generate_assembly_manual`	`write`	assumed
`get_manual_revision`	`read`	inferred
`list_manual_history`	`read`	inferred
`retire_manual_revision`	`delete`	inferred
`license_status_live`	`read`	inferred
`open_billing_portal`	`read`	inferred
`preview_overage_charge`	`read`	inferred
`start_subscription_checkout`	`read`	inferred
`usage_summary`	`read`	inferred
`export_step`	`write`	assumed
`cloud_backup_configure`	`write`	assumed
`cloud_clone_design`	`write`	assumed
`cloud_clone_feature`	`write`	assumed
`cloud_clone_preset`	`write`	assumed
`cloud_documents`	`write`	inferred
`cloud_list_remote_branches`	`read`	inferred
`cloud_list_remote_releases`	`read`	inferred
`cloud_pull_branch`	`write`	assumed
`cloud_pull_feature_branch`	`write`	assumed
`cloud_pull_preset_branch`	`write`	assumed
`cloud_push_branch`	`write`	inferred
`cloud_push_feature_branch`	`write`	inferred
`cloud_push_feature_release`	`write`	inferred
`cloud_push_preset_branch`	`write`	inferred
`cloud_push_preset_release`	`write`	inferred
`cloud_remote_list`	`read`	inferred
`cloud_retire_remote_branch`	`write`	assumed
`auto_add_rubber_feet`	`write`	inferred
`auto_multicolor_from_texture`	`write`	assumed
`auto_recess_pocket`	`write`	inferred
`batch_decorate`	`write`	assumed
`estimate_batch_cost`	`read`	inferred
`estimate_decoration_cost`	`read`	inferred
`find_closest_filaments`	`read`	inferred
`generate_qr_decoration`	`write`	assumed
`paint_mesh_regions`	`write`	inferred
`resolve_template_decoration`	`write`	assumed
`segment_mesh_regions`	`read`	inferred
`smart_decorate`	`write`	assumed
`inspect_design`	`write`	assumed
`inspect_mesh_view`	`read`	inferred
`verify_mesh_measurements`	`read`	inferred
`build_organic_mesh`	`write`	assumed
`design_session`	`write`	assumed
`list_design_goals`	`read`	inferred
`solve_sketch`	`write`	assumed
`add_mesh_comment`	`write`	inferred
`annotate_decoration_preset_branch`	`write`	inferred
`annotate_design_branch`	`write`	inferred
`annotate_feature_branch`	`write`	inferred
`apply_decoration_preset`	`write`	assumed
`archive_decoration_preset`	`delete`	inferred
`archive_design`	`delete`	inferred
`archive_feature`	`delete`	inferred
`attach_part_feature`	`write`	assumed
`best_design_version`	`read`	inferred
`bisect_bad`	`write`	assumed
`bisect_current`	`read`	inferred
`bisect_end`	`write`	assumed
`bisect_good`	`write`	assumed
`bisect_skip`	`write`	assumed
`bisect_start`	`write`	assumed
`check_design_regression`	`read`	inferred
`cherry_pick_decoration_modification`	`write`	assumed
`cherry_pick_feature_modification`	`write`	assumed
`cherry_pick_modification`	`write`	assumed
`compare_branches`	`read`	inferred
`compare_design_versions`	`read`	inferred
`create_decoration_preset`	`write`	inferred
`create_decoration_preset_branch`	`write`	inferred
`create_design`	`write`	inferred
`create_design_branch`	`write`	inferred
`create_feature_branch`	`write`	inferred
`cross_branch_ab_report`	`write`	assumed
`cross_feature_ab_report`	`write`	assumed
`cross_preset_ab_report`	`write`	assumed
`design_version_health`	`write`	assumed
`detect_decoration_preset_merge_conflicts`	`write`	inferred
`detect_feature_merge_conflicts`	`write`	inferred
`detect_merge_conflicts`	`write`	inferred
`dismiss_regression_alert`	`write`	inferred
`fingerprint_feature`	`read`	inferred
`get_comment_thread`	`read`	inferred
`get_decoration_preset`	`read`	inferred
`get_design`	`read`	inferred
`get_design_ancestry`	`read`	inferred
`get_design_pull_request`	`read`	inferred
`get_feature`	`read`	inferred
`get_part_passport`	`read`	inferred
`get_reflog_entry`	`read`	inferred
`get_regression_alerts`	`read`	inferred
`import_external_feature`	`write`	assumed
`import_external_mesh`	`write`	assumed
`import_model_parts`	`write`	assumed
`list_bisect_sessions`	`read`	inferred
`list_cherry_pick_candidates`	`read`	inferred
`list_decoration_cherry_pick_candidates`	`read`	inferred
`list_decoration_preset_branches`	`read`	inferred
`list_decoration_preset_releases`	`read`	inferred
`list_decoration_preset_versions`	`read`	inferred
`list_decoration_presets`	`read`	inferred
`list_design_branches`	`read`	inferred
`list_design_pull_requests`	`read`	inferred
`list_design_releases`	`read`	inferred
`list_designs`	`read`	inferred
`list_feature_branches`	`read`	inferred
`list_feature_cherry_pick_candidates`	`read`	inferred
`list_feature_kinds`	`read`	inferred
`list_feature_releases`	`read`	inferred
`list_feature_versions`	`read`	inferred
`list_features`	`read`	inferred
`list_mesh_comments`	`read`	inferred
`merge_decoration_preset_branches`	`write`	inferred
`merge_design_branches`	`write`	inferred
`merge_feature_branches`	`write`	inferred
`promote_kit_piece`	`write`	assumed
`propose_design_change`	`write`	assumed
`prune_design_render_cache`	`delete`	inferred
`pull_reflog_from_cloud`	`read`	inferred
`push_reflog_to_cloud`	`write`	inferred
`read_design_sidecar`	`read`	inferred
`rebase_design_branch`	`write`	assumed
`rebase_feature_branch`	`write`	assumed
`rebase_preset_branch`	`write`	assumed
`recategorize_artifact`	`write`	inferred
`record_decoration_preset_outcome`	`write`	assumed
`record_design_version_outcome`	`write`	assumed
`rename_decoration_preset`	`write`	inferred
`rename_design`	`write`	inferred
`rename_design_branch`	`write`	inferred
`rename_feature`	`write`	inferred
`render_design_mesh`	`write`	assumed
`reopen_comment_thread`	`write`	assumed
`reply_to_comment`	`write`	assumed
`resolve_comment_thread`	`write`	assumed
`restore_from_reflog_entry`	`write`	assumed
`retire_decoration_preset_branch`	`write`	assumed
`retire_decoration_preset_release`	`write`	assumed
`retire_design_branch`	`write`	assumed
`retire_design_release`	`write`	assumed
`retire_feature_branch`	`write`	assumed
`retire_feature_release`	`write`	assumed
`review_design_pull_request`	`write`	inferred
`rollback_feature`	`write`	assumed
`save_feature`	`write`	assumed
`show_branch_history`	`read`	inferred
`show_design_lineage`	`read`	inferred
`show_reflog`	`read`	inferred
`sign_decoration_preset_release`	`write`	assumed
`sign_design_release`	`write`	assumed
`sign_feature_release`	`write`	assumed
`source_merge_three_way`	`write`	inferred
`unarchive_decoration_preset`	`delete`	inferred
`unarchive_design`	`delete`	inferred
`unarchive_feature`	`delete`	inferred
`undo_last_head_change`	`write`	assumed
`verify_decoration_preset_release`	`read`	inferred
`verify_design_release`	`read`	inferred
`verify_feature_release`	`read`	inferred
`visual_diff_meshes`	`write`	assumed
`visualize_branch_tree`	`write`	assumed
`assess_drawing_manufacturability`	`write`	assumed
`intake_engineering_drawing`	`write`	assumed
`submit_drawing_extraction`	`write`	assumed
`analyze_frame_bracing`	`read`	inferred
`answer_material_question`	`write`	assumed
`apply_calibration_recommendations`	`write`	assumed
`assess_calibration_status`	`read`	inferred
`classify_calibration_confidence`	`write`	assumed
`compute_iso_fit`	`write`	assumed
`design_for_load`	`write`	assumed
`explain_calibration_for_design`	`write`	assumed
`get_calibration_freshness`	`read`	inferred
`get_calibration_health_recommendations`	`read`	inferred
`get_parser_health_summary`	`read`	inferred
`get_provenance_history`	`read`	inferred
`import_third_party_calibration`	`write`	assumed
`ingest_measurement`	`write`	inferred
`query_per_machine_offset`	`read`	inferred
`recommend_running_clearance`	`write`	inferred
`record_calibration_correction`	`write`	assumed
`request_calibration_test_print`	`write`	inferred
`revert_calibration_recommendations`	`delete`	inferred
`tolerance_stack_analysis`	`write`	assumed
`verify_provenance_integrity`	`read`	inferred
`assess_bom_sourcing_risk`	`read`	inferred
`assess_conformal_coating_application`	`write`	assumed
`assess_fair_reaccomplishment`	`read`	inferred
`check_chemical_resistance`	`read`	inferred
`check_magnet_design`	`read`	inferred
`design_hole_for_product`	`write`	assumed
`drying_advisor`	`write`	assumed
`generate_magnet_qc_plan`	`write`	assumed
`ingest_material_datasheet`	`read`	inferred
`list_ingested_materials`	`read`	inferred
`lookup_fastener`	`read`	inferred
`manage_fair_characteristics`	`write`	inferred
`manage_fair_evidence_bundle`	`write`	inferred
`manage_fair_registry`	`read`	inferred
`manage_protection_outcomes`	`read`	inferred
`manage_supplier_document_evidence`	`write`	inferred
`prepopulate_fair_draft`	`write`	assumed
`propose_sourcing_remediation`	`delete`	inferred
`read_material_datasheet`	`read`	inferred
`recommend_adhesive`	`write`	assumed
`recommend_hardware_pocket`	`write`	assumed
`recommend_hole`	`write`	assumed
`recommend_joint_strategy`	`write`	assumed
`recommend_magnet_for_product`	`write`	assumed
`recommend_static_dissipative_material`	`write`	assumed
`record_bond_outcome`	`write`	assumed
`record_chemical_outcome`	`write`	assumed
`record_esd_measurement`	`write`	assumed
`record_hardware_outcome`	`write`	assumed
`record_load_outcome`	`write`	assumed
`record_magnet_outcome`	`write`	assumed
`review_magnet_supplier_packet`	`write`	assumed
`add_feature_during_print_fleet`	`write`	inferred
`assess_fleet_power_loss`	`write`	assumed
`decorate_during_print_fleet`	`write`	assumed
`evaluate_fleet_reroute`	`write`	inferred
`fleet_cancel`	`delete`	inferred
`fleet_colour_match`	`write`	assumed
`fleet_hardware_stops`	`write`	assumed
`fleet_nozzle_agreement`	`write`	assumed
`fleet_pause`	`write`	assumed
`fleet_resume`	`write`	assumed
`fleet_set_speed`	`write`	inferred
`fleet_skip_objects`	`write`	assumed
`maintenance_due`	`read`	inferred
`may_i_print`	`write`	assumed
`revert_mid_print_fleet`	`write`	assumed
`check_skin_contact_declaration`	`read`	inferred
`check_skin_contact_suitability`	`read`	inferred
`record_skin_contact_outcome`	`write`	assumed
`delete_decoration`	`delete`	inferred
`delete_design`	`delete`	inferred
`delete_feature`	`delete`	inferred
`resume_interrupted_print`	`write`	assumed
`batch_estimate_plate_part_costs`	`read`	inferred
`estimate_plate_part_costs`	`read`	inferred
`print_cost_intelligence`	`write`	assumed
`abrasive_escalation`	`write`	assumed
`add_feature_during_print`	`write`	inferred
`add_pin_joints`	`write`	inferred
`advise_kit_scale`	`read`	inferred
`analyze_mid_print_impact`	`read`	inferred
`answer_printer_question`	`write`	assumed
`auto_detect_nozzle`	`write`	assumed
`auto_recover`	`write`	assumed
`check_assembly_stands`	`read`	inferred
`check_nozzle_capacity_for_print`	`read`	inferred
`check_power_loss_recovery`	`read`	inferred
`cutter_wear_status`	`read`	inferred
`deboss_during_print`	`write`	assumed
`decorate_during_print`	`write`	inferred
`food_safety_for_printer`	`write`	assumed
`generate_recovery_gcode`	`write`	assumed
`get_auto_tuned_settings`	`read`	inferred
`get_community_wear_baseline`	`read`	inferred
`get_maintenance_prediction`	`read`	inferred
`get_material_success_rates`	`read`	inferred
`get_material_warnings`	`read`	inferred
`get_my_nozzle_wear_patterns`	`read`	inferred
`get_nozzle_state`	`read`	inferred
`get_optimal_settings`	`read`	inferred
`get_print_confidence`	`read`	inferred
`get_print_learning_summary`	`read`	inferred
`get_printer_melt_rate`	`read`	inferred
`get_telemetry_preferences`	`read`	inferred
`list_nozzle_states`	`read`	inferred
`make_printable`	`write`	assumed
`nozzle_drift_attribution`	`write`	assumed
`nozzle_wear_status`	`read`	inferred
`plan_hardware_insertion`	`write`	assumed
`plan_kit_plates`	`write`	assumed
`plan_object_skip`	`write`	assumed
`plan_supports`	`write`	assumed
`preview_decorated_mesh`	`read`	inferred
`record_cutter_replacement`	`write`	assumed
`record_extrusion_event`	`write`	assumed
`record_filament_colour`	`write`	assumed
`record_hardware_insertion`	`write`	assumed
`recover_power_loss_print`	`write`	assumed
`regenerate_3mf_thumbnail`	`read`	inferred
`separate_overlapping_parts`	`write`	assumed
`set_nozzle_state`	`write`	inferred
`set_telemetry_preference`	`write`	inferred
`split_mesh_to_fit`	`write`	assumed
`verify_mesh_fit`	`read`	inferred
`wrap_gcode_as_resume_3mf`	`write`	assumed
`generate_ashtray`	`write`	assumed
`generate_bookmark`	`write`	assumed
`generate_coaster`	`write`	assumed
`generate_fridge_magnet`	`write`	assumed
`generate_frisbee`	`write`	assumed
`generate_jewelry_tray`	`write`	assumed
`generate_keychain`	`write`	assumed
`generate_license_plate_frame`	`write`	assumed
`generate_nameplate`	`write`	assumed
`generate_ornament`	`write`	assumed
`generate_pen_cup`	`write`	assumed
`generate_pet_bowl`	`write`	assumed
`generate_pet_tag`	`write`	assumed
`generate_rolling_tray`	`write`	assumed
`generate_soap_dish`	`write`	assumed
`generate_wall_plaque`	`write`	assumed
`add_qr_to_product`	`write`	inferred
`batch_generate_products`	`write`	assumed
`describe_face`	`read`	inferred
`generate_decorated_product`	`write`	assumed
`generate_product_base`	`write`	assumed
`get_face_emboss_depth`	`read`	inferred
`get_product_color_roles`	`read`	inferred
`get_product_faces`	`read`	inferred
`list_decoratable_faces`	`read`	inferred
`list_product_types`	`read`	inferred
`recommend_text_size`	`write`	assumed
`list_proven_recipes`	`read`	inferred
`record_proven_recipe`	`write`	assumed
`set_speed_percent`	`write`	inferred
`set_speed_schedule`	`write`	inferred
`report_issue`	`write`	assumed
`add_team_member`	`write`	inferred
`apply_role_template`	`write`	assumed
`backfill_artifact_into_org`	`write`	inferred
`create_team`	`write`	inferred
`delete_team`	`delete`	inferred
`evaluate_pr_approval`	`write`	assumed
`export_audit_log`	`write`	assumed
`github_start_device_login`	`write`	assumed
`grant_scope`	`write`	assumed
`list_approval_gates`	`read`	inferred
`list_my_orgs`	`read`	inferred
`list_my_teams`	`read`	inferred
`list_org_members`	`read`	inferred
`list_role_templates`	`read`	inferred
`list_scopes`	`read`	inferred
`list_team_members`	`read`	inferred
`list_teams`	`read`	inferred
`remove_approval_gate`	`delete`	inferred
`remove_team_member`	`delete`	inferred
`require_recent_auth`	`write`	assumed
`revoke_scope`	`delete`	inferred
`set_approval_gate`	`write`	inferred
`transfer_artifact_between_orgs`	`write`	inferred
`generate_technical_drawing`	`write`	assumed
`list_technical_drawings`	`read`	inferred
`apply_geometric_texture`	`write`	assumed
`apply_image_texture`	`write`	assumed
`apply_procedural_texture`	`write`	assumed
`delete_custom_palette`	`delete`	inferred
`keep_painted_detail`	`write`	assumed
`list_custom_palettes`	`read`	inferred
`list_procedural_textures`	`read`	inferred
`preview_texture_2d`	`read`	inferred
`push_palettes_to_cloud`	`write`	inferred
`recover_texture_detail`	`write`	assumed
`save_custom_palette`	`write`	assumed
`keep_design`	`write`	assumed
`kiln_viewer_payload`	`write`	assumed
`kiln_monitor_snapshot`	`write`	assumed
`kiln_monitor_control`	`write`	assumed

Record history

Earlier records for this server. A correction is added here, never written over the record it corrects.

Recorded	Exposure	Source
2026-10-15	100	tools/list answered by the PyPI package kiln3d==1.4.1 (published to PyPI as kiln3d, listed in the official MCP registry as io.github.codeofaxel/kiln 1.4.1), run in an isolated container with no network access and placeholder credentials

Answering this question about your own agent? The self-serve stack report applies the same reading to your own stack or server and gives you a dated document you can hand to a customer's security review. It is generated in your browser, with nobody to wait for. Buying one does not change this page, its score or its place in the index — see Independence.

Maintain this server? If this page misreads your manifest, or your server has changed, submit its current tools/list response and it will be re-scored and dated. Corrections are published alongside the original, not in place of it.